SumUp, printer and account security

Connect SumUp, print labels directly and protect the owner's account.

Connecting SumUp

  1. Settings → Connections → “Connect SumUp” (owner). The connection is included in the plan.
  2. Log in to SumUp and authorise Seconda: reading your transactions and sending payments to your terminal.
  3. You return to Seconda with your merchant account displayed. Transactions are synchronised every 10 minutes.

You can disconnect SumUp at any time. Seconda stores no API key from your account: only encrypted authorisation tokens. The details (permissions requested, matching, troubleshooting) are in the page “Connecting SumUp, step by step”.

Printing labels with QZ Tray

  1. Install QZ Tray on the counter computer (free program to launch at start-up).
  2. In Settings → “Label printer (this workstation)”, click “Detect printers” and choose the printer.
  3. Choose the language (ZPL for Zebra, EPL for Eltron), the format (50 × 30 mm at 203 dpi by default) and tick “Print directly with QZ Tray”.
  4. Once per computer, add the Seconda certificate in QZ Tray (see the section below).
  5. Run “Print a test label”. If QZ Tray still shows a window, click “Allow”.

This setting is specific to the computer. Without QZ Tray, or in case of a problem, Seconda falls back to browser printing.

Changing the VAT number and the shop's identity

Settings → Documents → “Shop's legal identity” (owner): company name, VAT number, company number (BCE/KBO) and address. Belgian numbers are checked (check digits) and formatted automatically. Leave the VAT empty if your shop is not subject to VAT. The change applies to new documents, to the reprinting of old ones (they always carry the current identity) and to your Seconda invoice; it is traced in the audit log.

Logo and contact details on your agreements and slips

In Settings → Documents, choose your shop's logo and enter phone, email and website. They are printed at the top of consignment agreements, pickup slips, vouchers and donation certificates, next to the name, address and VAT number. You can also add your shop's IBAN and draw the shop's signature: it is printed in the “For the shop” box. Each document also carries a footer with your legal notices. The voucher includes the terms and, if your shop is under the profit margin scheme, the mention “VAT on the margin”.

Downloading agreements and slips as PDF

Each document (consignment agreement, pickup slip, voucher, donation certificate, consignment to be valued) has a “Download as PDF” button next to the print button. The A4 file is saved in the Downloads folder: open it, then print it from Windows with any printer, or send it by email. The consignor can also download their agreements from “My agreements” in their portal. This works without QZ Tray.

Printing agreements and slips on the regular (A4) printer

By default, consignment agreements, pickup slips and vouchers are printed through the browser's print dialog, which may offer the label printer. To make them always come out on your A4 printer: in Settings → Printer, click “Detect printers”, choose the printer in “Documents printer”, tick “Print documents directly on this printer (QZ Tray)”, save, then run “Print a test document”. This setting is specific to the computer; without it, or if QZ Tray is unavailable, the browser's print dialog opens.

If the document is sent but stays in the Windows queue and then goes into error: check that the printer is on, connected (Wi-Fi or USB), with paper, then open Windows Settings → Printers & scanners, delete the stuck jobs and run a test page from Windows. If Windows cannot print either, the problem lies with the printer or its driver, not with Seconda. To go back to the browser's print dialog, untick “Print documents directly on this printer”.

Approving the Seconda certificate in QZ Tray (once per computer)

Seconda's certificate is self-signed: QZ Tray therefore shows a red shield in its “Action Required” window. In that case, the “Allow” button is greyed out as soon as you tick “Remember this decision”, and QZ Tray asks for permission again at every print. For the permission to be permanent, add the certificate by hand:

  1. Download the certificate: https://app.seconda.be/seconda-qz.crt (the file is then in the Downloads folder).
  2. Right-click the QZ Tray icon near the clock, then “Advanced” → “Site Manager”.
  3. Under the “Allowed” list, click “+” and choose the file seconda-qz.crt (if needed, show “All files”).
  4. Check that a “Seconda / CryptaGuard BV” line appears in “Allowed”, then close.

This step must be repeated on each computer that prints. After that, QZ Tray no longer shows a window.

If “QZ Tray is not responding”

  • Check that the QZ Tray icon is present near the clock; otherwise restart the program.
  • Open https://localhost:8181 in the browser: if a warning appears, choose “Advanced” then “Continue”. You should see a “Hello” page.
  • In Edge or Chrome, allow local network access for app.seconda.be (padlock to the left of the address), then reload the page (Ctrl+F5).
  • Click “Detect printers”: the QZ Tray window may open behind the browser (taskbar). Click “Allow”. If it comes back every time, add the certificate in the Site Manager (see the step above).
  • An ad-blocking extension, the antivirus or the firewall may block the connection to localhost:8181: disable them to test.

Printers without ZPL or EPL

For a printer that does not understand ZPL or EPL (Brother, Dymo…), choose “Image” as the language: QZ Tray prints the label as an image at the exact dimensions, with a Code 128 barcode.

Dymo 11354 labels (32 × 57 mm): choose the “DYMO LabelWriter” printer in the list. Seconda automatically sets the ZPL language (the Dymo LabelWriter 550 understands ZPL), the 57 × 32 mm format and 203 dpi (the resolution of the ZPL emulation). On the Dymo, the € symbol is printed as “EUR” and accents are removed. The QR code is drawn there in rectangles (the only method the Dymo prints). If the label comes out shifted or cut off, adjust the width and height (or swap them).

Shopify shop (module)

The Shopify block appears under SumUp; the module (€10.00 excl. VAT per month) is activated there: see the page “Shopify shop (module)”.

Installing Seconda on your device

  • On a computer (Chrome or Edge): click the install icon to the right of the address bar, or the browser menu then “Install Seconda”.
  • On an Android phone or tablet (Chrome): menu then “Install app” or “Add to home screen”.
  • On an iPhone or iPad (Safari): Share button then “Add to Home Screen”.

Seconda then opens like an app, with its Sales and New consignment shortcuts. An Internet connection is always required: nothing is saved offline.

Two-factor authentication (optional)

In Settings, “Two-factor authentication”: scan the QR code with an authenticator app (Google Authenticator, Authy, 1Password…) and enter the 6-digit code. Write down the 8 backup codes: they are shown only once and each works only once if you lose your phone. Once activated, each new login by the owner asks for this code, and access to the owner's screens is refused until it is entered.


Updated: 2026-11
Connecting SumUp, step by step →